17-08-2021

Iso 2768 Mk

ISO 2768-1:1989

This standard was last reviewed and confirmed in 2017. Therefore this version remains current.

Abstract Preview

  • .2 The maximum limit for ISO Auto can be set to ISO 6400, ISO 12800, H1 (ISO 51200) or H2 (102400).3 According to the settings for Range for ISO Auto, Maximum limit and Minimum limit.4 Maximum limit settable within the range of ISO 400–25600 for ISO Auto in Time-lapse movies. Exposure Compensation ±3 stops in 1/3- or 1/2-stop increments.
  • Variations on dimensions without tolerance values are according to ' ISO 2768'. All tolerance limits are given in mm. ISO 2768 and derivative geometrical tolerance standards are intendedto simplify drawing specifications for mechanical tolerances. ISO 2768 is mainly for parts that are manufactured by way of machining or removal of materials.
  • If general tolerances according to ISO 2768-1 are valid, the following has to be inserted in the title box, i.e. For tolerance class medium. ISO 2768 – m or general tolerance ISO 2768 – m. For new designs only the general tolerance according to DIN ISO 2768-1 should be valid.

DIN ISO 2768 1 / 3 Maryland Metrics Technical Data Chart: General Tolerances to DIN ISO 2768 T1 and T2 The latest DIN standard sheet version applies to all parts made to DIN standards. Variations on dimensions without tolerance values are according to 'DIN ISO 2768-mk'. GENERAL TOLERANCES FOR LINEAR AND ANGULAR DIMENSIONS (DIN ISO 2768 T1).

This part is intended to simplify drawing indications and specifies general tolerances in four tolerance classes. It applies to the dimensions of workpieces that are produced by metal removal or are formed from sheet metal. It contains three tables and an informative annex with regard to concepts behind general tolerancing of dimensions.


General information

  • Publication date : 1989-11
  • Number of pages : 3
  • :
    Dimensional and geometrical product specifications and verification
  • ICS :
    Limits and fits

Iso 2768 Mk Holes

Buy this standard

  • CHF38

Life cycle


Iso 2768 Mk Internal Radius

  • Previously

  • Now

    ISO 2768-1:1989

    A standard is reviewed every 5 years
    Stage: 90.93 (Confirmed)
    • 20
      Preparatory
    • 30
      Committee
    • 40
    • 50
    • 60
      Publication
    • 90
      Review
+41 22 749 08 88

Iso 2768-mk Tolerance Chart

Opening hours:
Monday to Friday - 09:00-12:00, 14:00-17:00 (UTC+1)

Iso 2768 Mk

Keep up to date with ISO

Iso 2768 Mk Standard

Sign up to our newsletter for the latest news, views and product information.

Iso 2768 Mk General Tolerances

ISO 2768-mK and gage size

ISO 2768-mK and gage size


If an outside cylindrical surface (defined on a drawing calling out ISO 2768-mK and DIN 7167) has a diameter of Ø12mm (+0.2 / -0.1) what would the correct “GO” gage size dimension (inside diameter of the gage) to verify this OD requirement?
I would appreciate someone with ISO knowledge to help me getting the right gage size.
I looked up online for DIN 7167 and found some recommendation such as: ”The issuing body recommends using DIN EN ISO 14405-1:2011-04 .”
I did not see DIN 7167 having the envelope requirement by default so, I am little bit confused about the appropriate gage dimension.
Any help will be greatly appreciated.
Thank you